Excavator rake bucket is an essential equipment in any construction site. Unlike a bulldozer, you can use an excavator rake to perform precise tasks such as grading and leveling. The versatility of this machine makes it one of the most commonly used components among contractors, and we believe that no construction site should be without a machine in hand.

Before buying, there are some questions you should answer: Which type is best for your needs? What size do I need? How much am I willing to pay? If you are looking for more information on these topics, or just want to learn more about excavator rakers in general before buying, please read our full guide below!

What are Excavator Rakes?

An excavator rake is used to loosen and remove topsoil, gravel, or other material from the ground.They can be installed in front of a digger or tractor.

Rakes can have sharpened steel teeth (cantilevered) for cutting roots and rocks, or rubber fingers for loosening hard dirt without breaking clods. The tool is very similar to a trench digger, using a continuous rotating blade instead of multiple teeth.

Another common use of excavator harrows is in large-scale grading, where harrows and other equipment are used to move and level large amounts of land. Raking has several advantages over traditional grading methods such as backhoe or bulldozer. For example, the process is relatively quiet, dust-free and causes minimal disruption to traffic flow or pedestrians.

Why Use an Excavator Rake?

The best thing about using a digger rake is that you can manipulate it easily. Rakes can move in any direction, making them ideal for landscaping and general grading. They are good at removing loose dirt from roads or other hard surfaces without damaging underlying structures such as asphalt and concrete. The raised teeth also aerate the soil, making it easier for plants to grow.

In addition, the flexibility of the excavator rake means that grading can be done in places where it was previously impossible. Instead of having to raze an entire area where you want to work, this saves money and time and reduces waste caused by leftover soil.

Types of excavator rakes available

There are many types of excavator rake available for purchase. Some rakes may be a better fit for your site than others, so it’s important to understand the function of each rake before deciding which one to buy.

• Dozer Rake – The teeth of bulldozer rakers are very large and sharp, so you can use them to level dirt on hard drives. These are ideal for cement or gravel driveways, foundations, and other places where surface materials need leveling.
• Land grading rake – This harrow features a set of teeth that can handle medium sized rocks while still at a reasonable price point. The barges in front of the rake are used to precisely level and level off dirt. This type of rake works well around subdivisions or on road dividers.
• Rake with Multiple Teeth – These harrows have longer teeth than flat harrows. Thus, during the leveling process, the teeth can handle larger rocks while still leaving the soil undisturbed. You should use this rake for zoning, street, and parking layout and design.
• Ditch Cleaning Rake – The teeth of the ditch cleaning rake is very sharp and angled to slice through hardpan material like it’s butter. You can use them to clean out drainage ditches.
• Box Scraper Rake – This rake is used to scrape away large areas of dirt and gravel. They are often equipped with multiple blades or shovels at the end to level large areas of land faster than bulldozer rakes.
• Blade Scraper Rakes – These rakers feature a set of rotating blades that you can use to remove asphalt, hard disk dirt, and even some types of concrete. They can be installed in front and back of excavators or tractors to improve efficiency when working on flat surfaces. These are often used on construction sites with paving companies.

Safety Precautions when Using an Excavator Rake

Since excavator harrows are more aggressive than traditional grading equipment, they should be used with care.

• Do not try to dig through soil that is too wet or hard, as this can damage the teeth of the rake and prevent it from working properly. Always check your manufacturer’s specifications to determine the recommended material limits so you can avoid replacing a rake before it’s time.
• Be careful when handling manure, wood chips or other organic materials. In this case, the rake is likely to become clogged very quickly. If necessary, use vegetable lubricant to keep things running smoothly.
• Check your hydraulic hoses to make sure they are adequately safe at all times. If they come loose, the power of the engine will be channelled into your hydraulic machinery, potentially causing serious damage to other components such as cylinders and pumps.
• If you want to use a bulldozer rake modified on a backhoe truck, make sure it is safe to install proper supports to avoid it flying out of the back end and running into something.

Final Thoughts

Excavator rakes are a good choice if you need to level off large areas of dirt, but don’t want to spend money on more expensive equipment. They are also helpful when working with small excavators that cannot carry heavy machinery.

As long as you exercise carefully, from long to short, and avoid working in wet environments or on too hard land, you should be able to use your excavator rake for years without any problems.

Get in touch with a reliable excavator rake manufacturer today to learn more. They can advise you on what type of rake is best for your application and help you decide whether a refurbished or new rake is a better choice.

Bonovo excavator rake main characteristics:

Wear resistant steel, prolong the durability of the rake;

According to the different vehicle, can provide a variety of sizes of rake;

Services of different shapes can be customized;

12 months warranty;